Welcome, Sunday , Dec , 05 , 2021 | 23:10 IST
CSIR - CMERI
सी एस आई आर - केन्द्रीय यांत्रिक अभियांत्रिकी अनुसंधान संस्थान
CSIR - Central Mechanical Engineering Research Institute
Material and Structural Evaluation Group is Equipped with state –of-the test facility in the area of Destructive and Non destructive testing.
The Group has a long record of service to different Industries throughout the Country including Blue Chip Public Sector Organization (viz NTPC, IOC,DVC, Coal India etc)
The NABL accredited facilities of the group in the domain of Mechanical and Fatigue Testing is among the few laboratories in the country.
The Group is formed to provide continuous support to different Power, Steel and Petrochemical Industries to access the condition and stability of structures and equipment bases. The Scientists and Technical officers of the group have the expertise in residual life assessment of structures, Finite element modeling and stress analysis, fatigue testing, analysis of engineering components and industrial structures by use of sophisticated scientific instruments and software.
Research Area: Download
Beneficiary Industries:
NTPC, NSPCL, Indian Oil Corporation Limited (IOCL), Damodar Valley Corporation (DVC), Steel Authority of India Limited (SAIL), Coal India Limited, National Aluminium Corporation Limited.(NALCO), Vedanta Vizag General Cargo Berth Pvt. Ltd.
Senior Principal Scientist
Qualification: Ph.D; M.E (Structures); B.Tech (Civil Engg.)
Specialisation: STRUCTURES
Phone: 9434022957 / 0343-2531023
Email: srd[at]cmeri[dot]res[dot]in
Qualification: Ph.D
Specialisation: Structural Engineering
Phone: +91-343-6510264 / +91-343-2602855
Research Type: R&D Focus Areas
Research Type: R&D Focus Areas
Micro / Nano scale manufacturing systems:
| Service Name | Description | Service Type |
|---|---|---|
| Compressive strength of cement | Calibration instruments / Testing Charge (Calib./Testing) (Rs.) (GST to be paid extra @18% or as applicable) Compressive strength of cement 2500.00 | Analysis/Testing/Calibration |
| Aggregate Crushing value | Calibration instruments / Testing Charge (Calib./Testing) (Rs.) (GST to be paid extra @18% or as applicable) Aggregate Crushing value 2500.00 | Analysis/Testing/Calibration |
| Sieve Analysis of stone chips | Calibration instruments / Testing Charge (Calib./Testing) (Rs.) (GST to be paid extra @18% or as applicable) Sieve Analysis of stone chips 2500.00 | Analysis/Testing/Calibration |
| Chemical Composition of structural Steel and Reinforcement bars | Calibration instruments / Testing Charge (Calib./Testing) (Rs.) (GST to be paid extra @18% or as applicable) Chemical Composition of structural Steel and Reinforcement bars 3600.00 | Analysis/Testing/Calibration |
| Water Absorption test | Calibration instruments / Testing Charge (Calib./Testing) (Rs.) (GST to be paid extra @18% or as applicable) Water Absorption test 2500.00 | Analysis/Testing/Calibration |
| Re-Bend Test | Calibration instruments / Testing Charge (Calib./Testing) (Rs.) (GST to be paid extra @18% or as applicable) Re-Bend Test 2500.00 | Analysis/Testing/Calibration |
| Bend Test | Calibration instruments / Testing Charge (Calib./Testing) (Rs.) (GST to be paid extra @18% or as applicable) Bend Test 2500.00 | Analysis/Testing/Calibration |
| High cycle fatigue testing | Calibration instruments / Testing Charge (Calib./Testing) (Rs.) (GST to be paid extra @18% or as applicable) High cycle fatigue testing upto 105 cycles (rates may be varied for higher number of cycle to be run) 10000.00 | Analysis/Testing/Calibration |
| Fracture properties of material J1C | Calibration instruments / Testing Charge (Calib./Testing) (Rs.) (GST to be paid extra @18% or as applicable) Fracture properties of material J1C 16000.00 | Analysis/Testing/Calibration |
| Fracture properties of material K1C | Calibration instruments / Testing Charge (Calib./Testing) (Rs.) (GST to be paid extra @18% or as applicable) Fracture properties of material K1C 10000.00 | Analysis/Testing/Calibration |
| Crushing Strength of Paver Block | Calibration instruments / Testing Charge (Calib./Testing) (Rs.) (GST to be paid extra @18% or as applicable) Crushing Strength of Paver Block 3000.00 | Analysis/Testing/Calibration |
| Non Destructive Testing Equipment | Ultrasonic Pulse Velocity Test Rebound Hammer Test Thickness measurement of steel structural components Dynamic Modulus of Elasticity through resonance frequency Measuring growth of STRAIN in structures | Analysis/Testing/Calibration |
| Available In-situ Scientific Services | Cooling Tower, High rise Chimney, Machine foundation, ID Fan, FD Fan, etc. Conveyor Structures, Tunnels Coal Bunkers, Coal handling plant etc. TG Foundations, D.M Plant structures, Boiler foundation, etc. Silos and Bunkers etc. | Analysis/Testing/Calibration |
| Calibration Facilities | Calibration of force proving instruments of Capacity: 10 kN, to 2000 kN Master equipment is with National Standard, CSIR-NPL traceability | Analysis/Testing/Calibration |
| Tensile Test | Calibration instruments / Testing Charge (Calib./Testing) (Rs.) Tensile Test in UTM (03 sample) (Yield Stress, UTS,% of Elongation) N.B: Sample to be prepared by customer 2500.00 in Instron (03 sample) (Yield Stress, UTS,% of Elongation) N.B: Sample to be prepared by customer 4000.00 | Analysis/Testing/Calibration |
| Proving Ring | Calibration instruments / Testing Charge (Calib./Testing) (Rs.) (GST to be paid extra @18% or as applicable) Proving Ring upto 50 Ton (Compression mode only) 12000.00 > 50 - 200 Ton (Compression mode only) 15000.00 | Analysis/Testing/Calibration |
| Low Cycle Fatigue Test | Calibration instruments / Testing Charge (Calib./Testing) (Rs.) Low cycle fatigue testing upto 104 cycles (rates may be varied for higher number of cycle to be run) 8000.00 | Analysis/Testing/Calibration |
| Crushing Strength of Concrete Cube | Calibration instruments / Testing Charge (Calib./Testing) (Rs.) (GST to be paid extra @18% or as applicable) Crushing Strength of Concrete Cube (05 nos Sample Required) 2500.00 | Analysis/Testing/Calibration |
| Crushing Strength of Bricks | Calibration instruments / Testing Charge (Calib./Testing) (Rs.) (GST to be paid extra @18% or as applicable) Crushing Strength of Bricks (05 nos Sample Required) 2500.00 | Analysis/Testing/Calibration |
The group ventured into new challenging areas of testing (High cycle fatigue testing of bolt fastner, Rotating bending fatigue test, rope testing etc) and industrial services (Robust refinery structures, solution for failed silos, high temperature exposed converter structures etc.
Print
Rssfeed
Youtube
Twitter
Facebook
Contact Us
LinkedIn