Welcome, Saturday , Jun , 10 , 2023 | 18:44 IST

  • Screen Reader
  • Skip to main content

Current Size: 100%

Industrial Service and Research Group

Industrial Service and Research Group of CSIR-CMERI is actively engaged in providing various engineering solutions to Industries (mainly Power plant industries) for the last 30 years. The domain of work of this group can be classified under mainly four categories:

  1. Residual Life Assessment of critical components of Boilers: CSIR-CMERI is accredited as one of the “Well Known Remanent Life Assessment Organization” by Central Boiler Board, Ministry of Commerce & Industries, Govt. of India. This group has undertaken numerous RLA work in the past for major power generating units across the country.
  2. Health Assurance of Boiler and Turbine components:  This group is also actively inspecting and certifying present state of health of various turbine components along with boiler components. The extent of damage is ascertained using various NDT and metallurgical techniques.
  3. Failure Analysis of Boiler Tubes and critical engineering components: A major chunk of time is dedicated to conduct various failure investigative studies. The purpose of these studies is to predict the possible cause/causes of failure and thereby propose remedial measures to avoid such failures in near future.

Quality assurance activities: Considerable amount of work is also being done to check the quality of various in-house castings, metallurgical and mechanical analysis of used products. NDT inspection of on-job engineering components etc.

Industrial Service and Research Group has been associated with numerous power and process plant industries across the country, notable among them are DVC, SAIL, CESC, HINDALCO, WBPDCL, Coal India, ECL, PSEB, NTPC, Haldia Petrochemicals etc.

FACILITIES @CSIR-CMERI RELATED TO INDUSTRIAL ACTIVITIES

  1. FULLY EQUIPPED NDT LABORATORY
  2. FULLY EQUIPPED METALLURGICAL LABORATORY
  3. MATERIAL CHRACTERIZATION FACILITIES
  1. FIELD EMISSION SCANNING ELECTRON MICROSCOPE (FESEM)
  2. SCANNING ELECTRON MICROSCOPE (SEM)
  3. OPTICAL MICROSCOPE WITH IMAGE ANALYSIS
  4. UNIVERSAL TESTING MACHINE
  5. ROTATING BEAM FATIGUE TESTING MACHINE

And other technical manpower capable for carrying NDT, RLA and Failure Analysis work

Address for Correspondance:

Mr. Debashis Ghosh, Principal Scientist & Head

Industrial Service and Research Group

CSIR- CMERI, M. G. Avenue, Durgapur-713209, WB, India

Phone No. : 0343-6510233(O), Mobile : +919475241396

email : ndt[at]cmeri[dot]res[dot]in

Division Head

  • Dr. Debashis GhoshB.E, M Tech, PhD

    Chief Scientist

    View Details

    Qualification: B.E, M Tech, PhD

    Specialisation: Metallurgical and Materials Engineering

    Phone: 0343-6452083 / 7063574885

    Email: dghosh[at]cmeri[dot]res[dot]in

Scientists

  • Dr. Atanu SahaPh.D. (Engg.), M.Tech.(Met.), B.E.(Met.)

    Senior Principal Scientist

    View Details

    Qualification: Ph.D. (Engg.), M.Tech.(Met.), B.E.(Met.)

    Specialisation: Metallurgical Engineering

    Phone: 0343-6452084 / 0343-2600885

    Email: atanu[at]cmeri[dot]res[dot]in

  • Dr. Kamalkishor Janardhanji UkeB.E(Mech) M.Tech(Design & Production) MBA(Finance) PhD(Perusing)

    Senior Principal Scientist

    View Details

    Qualification: B.E(Mech) M.Tech(Design & Production) MBA(Finance) PhD(Perusing)

    Specialisation: Vibration Analysis & Mechanical Engineering Design

    Phone: +91-343-6452143

    Email: kjuke[at]cmeri[dot]res[dot]in

  • Mr. Chidambaram SM.Tech., B.E.

    Senior Scientist

    View Details

    Qualification: M.Tech., B.E.

    Specialisation: Metallurgical and Materials Engg.

    Phone:

    Email: chidambaram[at]cmeri[dot]res[dot]in

Technical Staffs

  • Mr. Sanjib Kumar DeB.Sc., Post Graduate Diploma in Laboratory Technique

    Sr. Technical Officer [3]

    View Details

    Qualification: B.Sc., Post Graduate Diploma in Laboratory Technique

    Specialisation: ASNT Level – II (MPT,DPT,RT)

    Phone: +91-343-6510233

    Email: sanjib[dot]de[at]cmeri[dot]res[dot]in

  • Mr. Subrata RayDIPLOMA IN MECHANICAL ENGINEERING

    Sr. Technical Officer [2]

    View Details

    Qualification: DIPLOMA IN MECHANICAL ENGINEERING

    Specialisation:

    Phone: +91-343-6452292

    Email: subrata[dot]ray[at]cmeri[dot]res[dot]in

  • Mr. Biplab SwarnakarM.Tech in Design & Production Engineering.

    Sr. Technical Officer [1]

    View Details

    Qualification: M.Tech in Design & Production Engineering.

    Specialisation: Vibration Analysis & Dynamic Balancing of Rotating Equipments, Laser Alignment, Condition Monitoring

    Phone: 0343-6452144

    Email: b[dot]swarnakar[at]cmeri[dot]res[dot]in

  • Mr. Abhijit Mondal

    Technical Officer

    View Details

    Qualification:

    Specialisation:

    Phone: 0343 6452021

    Email: abhijit[dot]mondal[at]cmeri[dot]res[dot]in

  • Mr. Nasir HussainDIPLOMA IN MECHANICAL ENGINEERING

    Technical Officer

    View Details

    Qualification: DIPLOMA IN MECHANICAL ENGINEERING

    Specialisation:

    Phone:

    Email: n_hussain[at]cmeri[dot]res[dot]in

  • Mr. Sourav KansabanikGraduate in Mechanical Engineering (AMIE)

    Technical Officer

    View Details

    Qualification: Graduate in Mechanical Engineering (AMIE)

    Specialisation: Vibration Analysis & Dynamic Balancing Of Rotating Equipments

    Phone: 0343-6452012

    Email: s[dot]kansabanik[at]cmeri[dot]res[dot]in

  • Mr. Dipankar SarkarDiploma in electrical enginerring

    GRII/4 SR TECH2

    View Details

    Qualification: Diploma in electrical enginerring

    Specialisation: ASNT level II (MPT,DPT,UT & RT)

    Phone: / +919002499568, +917031291435

    Email: d[dot]sarkar[at]cmeri[dot]res[dot]in

Click Here for Online Payment

Service Name Description Service Type
Brinell Hardness test Name of machine usage Charges (Rs) Institute  Charges (Rs) Industries Brinell Hardness test 1000.00 2000.00 Analysis/Testing/Calibration
Vickers Hardness test Name of machine usage Charges (Rs) Institute  Charges (Rs) Industries Vickers Hardness test 1000.00 2000.00 Analysis/Testing/Calibration
Ultrasonic Thickness measurement Name of machine usage Charges (Rs) Institute  Charges (Rs) Industries Ultrasonic Thickness measurement 1000.00 2000.00 Analysis/Testing/Calibration
Video imageoscopy Name of machine usage Charges (Rs) Institute  Charges (Rs) Industries Video imageoscopy 1300.00 2600.00 Analysis/Testing/Calibration
Ultrasonic testing Name of machine usage Charges (Rs) Institute  Charges (Rs) Industries Ultrasonic testing (UT) 1000.00 2000.00 Analysis/Testing/Calibration
Atomic emission spectrometer Name of machine usage Charges (Rs) Institute  Charges (Rs) Industries Atomic emission spectrometer (AES) 1300.00 2600.00 Analysis/Testing/Calibration
Optical Image Analyser Name of machine usage Charges (Rs) Institute  Charges (Rs) Industries Optical Image Analyser (Optical Microscope) 1250.00 2500.00 Analysis/Testing/Calibration
Magnetic Particle test Name of machine usage Charges (Rs) Institute  Charges (Rs) Industries Magnetic Particle test 1000.00 2000.00 Analysis/Testing/Calibration
Servo-Hydraulic System Name of machine usage Charges (Rs) Institute  Charges (Rs) Industries Servo-Hydraulic System (UTM) 2500.00 5000.00 Analysis/Testing/Calibration
In-situ Metallography Kit (Transpol-5)
In-situ Metallography Kit (Transpol-5)
Facility Type:
Non-Destructive Testing Machines
Dye-Penetrant Test Kit
Dye-Penetrant Test Kit
Facility Type:
Non-Destructive Testing Machines
Magnetic Particle Test Machines
Magnetic Particle Test Machines
Facility Type:
Non-Destructive Testing Machines
Ultrasonic Test Machines
Ultrasonic Test Machines
Facility Type:
Non-Destructive Testing Machines
Optical Microscope with Image Analyzer
Optical Microscope with Image Analyzer
Facility Type:
Optical Microscope with Image analyzer
Scanning Electron Microscope (SEM) alongwith Energy Dispersive Spectroscopy (EDS)
Scanning Electron Microscope (SEM) alongwith Energy Dispersive Spectroscopy (EDS)
Facility Type:
Scanning Electron Microscope (SEM) along with Energy Dispersive Spectroscopy (EDS)
Semi-automatic Polishing Machine
Semi-automatic Polishing Machine
Facility Type:
Metallographic Equipments
Mounting Machine
Mounting Machine
Facility Type:
Metallographic Equipments
Abrasive Cutting Machine
Abrasive Cutting Machine
Facility Type:
Metallographic Equipments
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.
Image CAPTCHA
Enter the characters shown in the image.

Last updated : 20 Mar, 2023
  • JIGYASA
  • Data Gov
  • India Gov
  • Search a Government Service
  • Vidya Lakshmi
  • Election Commission of India
  • CSIR's COVID Portal
  • GOI Directory
  • PMNRF
  • Secure Sockets Layer
  • MyGov
  • Incredible India
  • STQC
  • Centralized Public Grievance Redress and Monitoring System
  • Make in India
  • CSIR' Technology Showcase
  • PRABHASS
  • Digital India
  • National Career Service

Copyright © 2016-2026. CSIR-Central Mechanical Engineering Research Institute. | Durgapur-713209, West Bengal, India | Site Owned and Maintained by CSIR-CMERI (IT Group)

Last Updated On: 05/06/2023
Visitor Count:2821600