CSIR-Central Mechanical Engineering Research Institute
Published on CSIR-Central Mechanical Engineering Research Institute (https://www.cmeri.res.in)

Printer-friendly >

Our Projects

  • Capability Building for Design and Development of Ultra Wide Band (UWB) Microwave Sensor for Hidden Object Detection

    Name of PI : Dr. Santu Kumar Giri

    Date : 04/01/2011 to 31/03/2014

    Type : Business Project

    Status : Completed Projects

  • Numerical Study of Water Droplet Mobility in Serpentine Gas Flow Channels of PEM Fuel Cell

    Name of PI : Dr. Bittagopal Mondal

    Date : 04/01/2011 to 09/06/2013

    Type : Business Project

    Status : Completed Projects

  • "Design of Radar-based Proximity Warning System for Haul Trucks used in Open-cast Mines "

    Name of PI : Mr. Rudra Prasad Chatterjee

    Date : 14/12/2010 to 15/03/2012

    Type : Business Project

    Status : Completed Projects

  • Design Standardization of grassroots innovation pDesign Standardization of grassroots innovation pertaining

    Name of PI : Dr. Subrata Kumar Mondal

    Date : 23/11/2010 to 07/10/2013

    Type : Business Project

    Status : Completed Projects

  • Chemistry Relevant to Utilization of CO2 for Sustainable Development Involving Coordination Complexes as Catalyst

    Name of PI : Dr. Priyabrata Banerjee

    Date : 01/11/2010 to 31/10/2013

    Type : Business Project

    Status : Completed Projects

  • Facility for Rheo Pressure Die Casting

    Name of PI : Dr. Sudip Kumar Samanta

    Date : 29/10/2010 to 30/09/2014

    Type : Business Project

    Status : Completed Projects

  • Establishment of wind tunnel facility for fluid dynamics, heat and mass transfer R & D study.

    Establishment of wind tunnel facility for fluid dynamics, heat and mass transfer R & D study.

    Name of PI : Dr. Murugan Thangadurai

    Date : 11/10/2010 to 31/03/2014

    Type : Plan Project

    Status : Completed Projects

  •  An Experimental Investigation

    Effect of Free Stream Turbulence (FST) on Flow past a Circular Cylinder: An Experimental Investigation

    Name of PI : Dr. Murugan Thangadurai

    Date : 11/10/2010 to 31/03/2014

    Type : Business Project

    Status : Completed Projects

  • Development of Aluminium alloy feedstock for manufacturing of components by Metal Injection Molding (MIM) process route

    Name of PI : Mrs. Manju Singh

    Date : 21/09/2010 to 30/09/2012

    Type : Plan Project

    Status : Completed Projects

  • Design and Analysis for a 2 DOF Real-Time Controlled Electro-Hydraulic Motion Simulator

    Name of PI : Dr. Bibhuti Bhusan Ghosh

    Date : 21/09/2010 to 20/09/2012

    Type : Business Project

    Status : Completed Projects

Pages

  • « first
  • ‹ previous
  • …
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • …
  • next ›
  • last »

Read More