PUBLICATIONS (JOURNALS) 

International Journals & Monographs (in reverse chronological order)

  1. B. Ray, G. Biswas and A. Sharma, Generation of secondary droplets in coalescence of a drop at a liquid/ liquid interface, Journal of Fluid Mechanics, Vol. 655, pp. 72-104, (2010)

  2. P. Saha and G. Biswas, Assessment of a Shear-Improved Subgrid Stress Closure for Turbulent Channel Flows, International Journal of Heat and Mass Transfer,Vol. 53, 4856-4863 , (2010)

  3. S. Sarkar, A. Dalal and G. Biswas, Mixed Convective Heat Transfer from Two Identical Square Cylinders in Cross Flow at Re=100,International Journal of Heat and Mass Transfer, Vol. 53, pp. 2628-2642, (2010)

  4. D. Chatterjee, G. Biswas and S. Amiroudine, Numerical simulation of flow past row of square cylinders for various separation ratios, Computers and Fluids, Vol. 39 pp. 49-59, (2010)

  5. D. Chatterjee, G. Biswas and S. Amiroudine, Numerical Investigation of Forced Convection Heat Transfer in Unsteady Flow Past a Row of Square Cylinders, International Journal of Heat and Fluid Flow, Vol. 30 pp. 1114-1128, (2009)

  6. I. Chakraborty, B. Ray, G. Biswas, F. Durst, A. Sharma, and P. S.
    Ghoshdastidar, Computational Investigation on Bubble Detachment from Submerged Orifice in Quiescent Liquid under Normal and Reduced Gravity, Physics of Fluids, Vol. 21, pp. 062103-1-062103-17, (2009)

  7. G. Tomar, G. Biswas, A. Sharma and S.W.J. Welch, Influence of Electric Field on Saturated Film Boiling, Physics of Fluids, Vol. 21, 032107 (2009).

  8. G. Biswas and S. Sarkar, Effect of Thermal Buoyancy on Vortex Shedding Past a Circular Cylinder in Cross Flow at Low Reynolds Numbers, International Journal of Heat and Mass Transfer, Vol. 52, pp. 1897-1912, (2009).

  9. R.M. Bhatnagar, B. Bhattacharya and G. Biswas, Analysis of Pilot Valve and Taper Groove Based Damper, Proceedings of I Mech E London Part C, J. Mechanical Engineering Science, Vol. 223 (C4), pp 859-871, (2009).

  10. S. Sen, S. Mittal and G. Biswas, Steady Separated Flow Past a Circular Cylinder at Low Reynolds Numbers, Journal of Fluid Mechanics, Vol. 620, pp. 89-119, (2009).

  11. G. Tomar, G. Biswas, A. Sharma and S.W.J. Welch, Multi-mode Analysis of Bubble Growth in Saturated Film Boiling, Physics of Fluids, Vol. 20, 092101, (2008).

  12. M. Nishi, B. Uensal, F. Durst and G. Biswas, Laminar-to-Turbulent Transition of Pipe Flows through Puffs and Slugs, Journal of Fluid Mechanics, Vol. 614, pp. 425-446, (2008) .

  13. R. Ranjan, A. Dalal and G. Biswas, A Numerical Study of Fluid flow and Heat Transfer around a Square Cylinder at Incidence using Unstructured Grids, Numerical Heat Transfer Part A, Vol. 54, pp. 890-913, (2008).

  14. N. Senthil Kumar and G. Biswas, A Finite Element Study of the Onset of Vortex Shedding in a Flow Past Two-dimensional Circular Cylinder, Progress in Computational Fluid Dynamics, Vol. 8, pp. 288-298, (2008).

  15. A. Dalal, V. Eswaran and G. Biswas, A Finite Volume Method for Navier-Stokes Equations on Unstructured Meshes, Numerical Heat Transfer Part B, Vol. 54, pp. 238-259, (2008).

  16. G. Tomar, D. Gerlach, G. Biswas, N. Alleborn, A. Sharma, F. Durst S. W. J. Welch , and A. Delgado, Two-phase Electrohydrodynamic Simulations Using a Volume of Fluid Approach, Journal of Computational Physics, Vol. 227, pp. 1267-1285, (2007).

  17. S.W.J. Welch and G. Biswas, Direct Simulation of Film Boiling Including Electrohydrodynamic Forces, Physics of Fluids, Vol. 19, 012106, (2007).

  18. G. Tomar, A. Sharma, V. Shenoy and G. Biswas, Surface Instability of Confined Elastic Bilayers: Theory and Simulations, Physical Review E, Vol. 76, 011607, (2007).

  19. S.R. Hiravennavar, E.G. Tulapurkara, G. Biswas, A Note on the Flow and Heat Transfer Enhancement in a Channel with Built-in Winglet Pair, Int. J. Heat and Fluid Flow, Vol. 28, pp. 299-305, (2007).

  20. K. Arul Prakash, G. Biswas and B.V. Rathish Kumar, Numerical Prediction of Fluid Flow and Heat Transfer in the Target System of an Axisymmetric Accelerator Driven Subcritical System, Journal of Heat Transfer (ASME), Vol. 129, pp. 582- 588, (2007).

  21. G. Tomar, V. Shankar, A. Sharma and G. Biswas, Electrohydrodynamic Instability of a Confined Viscoelastic Liquid Film, Journal of Non-Newtonian Fluid Mechanics, Vol. 143, pp. 120-130, (2007).

  22. K. Arul Prakash, G. Biswas and B.V. Rathish Kumar, Thermal Hydraulics of the Spallation Target Module of an Accelerator Driven Sub-critical System: A Numerical Study, International Journal of Heat and Mass Transfer, Vol. 49, pp. 4633-4652, (2006).

  23. K. Arul Prakash, G. Biswas and B.V. Rathish Kumar, Numerical Simulation of the Target System of an ADSS, International Journal of Computational Fluid Dynamics, Vol. 20, pp. 513-520, (2006).

  24. A. Maheshwari, R.P. Chhabra and G. Biswas, Effect of Blockage on Drag and Heat Transfer from a Single Sphere and an In-line Array of Three Spheres, Powder Technology, Vol. 168, pp. 74-83, (2006).

  25. G. Tomar, V. Shankar, S.K. Shukla, A. Sharma, G. Biswas, Instability and Dynamics of Thin Viscoelastic Liquid Films, European Physical Journal E, Vol. 20, pp. 185-200, (2006).

  26. K. Arul Prakash, S. De, B.V. Rathish Kumar and G. Biswas, A SUPG Finite Element Study of an ADSS, Finite Element in Analysis and Design, Vol. 42, pp. 1123-1136, (2006).

  27. Y. Srinivas, G. Biswas, A.S. Parihar and R. Ranjan, Large-Eddy Simulation of High Reynolds Number Turbulent Flow Past a Square Cylinder, Journal of Engineering Mechanics (ASCE), Vol. 132, pp. 327-335, (2006).

  28. D. Gerlach, G. Tomar, G. Biswas, and F. Durst, Comparison of Volume-of- Fluid Methods for Computing Surface Tension-Dominant Two-Phase Flows, International Journal of Heat and Mass Transfer, Vol. 49, pp. 740-754, (2006).

  29. G. Tomar, G. Biswas, A. Sharma and A. Agrawal, Numerical Simulation of Bubble Growth in Film Boiling using CLSVOF Method, , Physics of Fluids, Vol. 17, 112103, (2005).

  30. J. Srikanth, E.G. Tulapurkara and G. Biswas, Large Eddy Simulation of Flow Past Built-In Winglet-Pair in a Rectangular Channel, International Journal of Fluid Mechanics Research, Vol. 32, pp. 310-326, (2005).

  31. K. Senthil Kumar, E. G. Tulapurkara, G. Biswas and B.H.L. Gowda, Reverse Flow in Channel with Obstruction at Entry, Fluid Dynamics Research, Vol. 37, pp. 387-398, (2005).

  32. D. Gerlach, G. Biswas, F. Durst and V. Kolobaric, Quasi-Static Bubble Formation on Submerged Orifices, International Journal of Heat and Mass Transfer, Vol. 48, pp. 425-438, (2005).

  33. S. Tiwari, D. Chakraborty, G. Biswas and P.K. Panigrahi, Numerical Prediction of Flow and Heat Transfer in a Channel in the Presence of a Built-in Circular Tube With and Without Integral Wake Splitter, International Journal of Heat and Mass Transfer, Vol. 48, pp. 439-453, (2005).

  34. J. M. Shi, D. Gerlach, M. Breuer, G. Biswas and F. Durst, Heating Effect on Steady and Unsteady Horizontal Laminar Flow of Air Past a Circular Cylinder, Physics of Fluids, Vol. 16, pp. 4331-4345, (2004).

  35. D. Agarwal, S.W.J. Welch, G. Biswas, and F. Durst, Planar Simulation of Bubble Growth in Film Boiling in Near-Critical Water Using a Variant of the VOF Method, Journal of Heat Transfer (ASME), Vol. 126, pp. 329-338, (2004).

  36. G. Biswas, M. Breuer and F. Durst, Backward-Facing Step Flows for Various Expansion Ratios at Low and Moderate Reynolds Numbers, Journal of Fluids Engineering (ASME), Vol. 126, pp. 362-374, (2004).

  37. A.K. Saha, K. Muralidhar and G. Biswas, Investigation of Two-and Three Dimensional Models of Transitional Flow Past a Square Cylinder, Journal of Engineering Mechanics (ASCE), Vol. 129, pp. 1320-1329, (2003).

  38. S. Tiwari, G. Biswas, P.L.N. Prasad and S. Basu, Numerical Prediction of Flow and Heat Transfer in a Rectangular Channel with a Built-in Circular Tube, Journal of Heat Transfer (ASME), Vol. 125, pp. 413-421, (2003).

  39. S. Tiwari, P.L.N. Prasad and G. Biswas, A Numerical Study of Heat Transfer in Fin-Tube Heat Exchangers using Winglet-Type Vortex Generators in Common-Flow-Down Configuration, Progress in Computational Fluid Dynamics, Vol. 3, pp. 32-41, (2003).

  40. T. Cziesla, H. Chattopadhyay, N.K. Mitra and G. Biswas, Prediction of Heat Transfer from Impinging Knife-Jets Using a Dynamic Subgrid Stress Model, Progress in Computational Fluid Dynamics, Vol. 3, pp. 22-31, (2003).

  41. S. Tiwari, D. Maurya, G. Biswas and V. Eswaran, Heat Transfer Enhancement in Crossflow Heat Exchangers using Oval Tubes and Multiple Delta Winglets, International Journal of Heat and Mass Transfer, Vol. 46, pp. 2841-2856, (2003).

  42. V. Prabhakar, G. Biswas, V. Eswaran, Numerical Prediction of Heat Transfer in a Channel with a Built-in Oval Tube and Various Arrangement of the Vortex Generators, Numerical Heat Transfer, Part A, Vol. 44, pp. 315-333, (2003).

  43. V. Kumar, G. Biswas, G. Brenner and F. Durst, Effect of Thermocapillary Convection in an Industrial Czochralski Crucible: Numerical Simulation, International Journal of Heat and Mass Transfer, Vol. 46, pp. 1641-1652, (2003).

  44. A.K. Saha, G. Biswas and K. Muralidhar, Three-dimensional Study of Flow Past a Square Cylinder at Low Reynolds Numbers, Int. J. Heat and Fluid Flow, Vol. 24, pp. 54-66, (2003).

  45. A. Jain, G. Biswas, D. Maurya, Winglet Type Vortex Generators with Common-Flow-Up Configuration for Fin-Tube Heat Exchangers, Numerical Heat Transfer, Part-A, Vol. 43, pp. 201-219, (2003).

  46. H. Chattopadhyay, G. Biswas, and N.K. Mitra, Heat Transfer from a Moving Surface due to Impinging Slot Jets, Journal of Heat Transfer (ASME), Vol. 124, pp. 433-440, (2002).

  47. V. Prabhakar, G. Biswas, V. Eswaran, Numerical Prediction of Heat Transfer with a Built-in Oval Tube and Two Different Shaped Vortex Generators, Numerical Heat Transfer, Part A, Vol. 41, pp. 307-329, (2002).

  48. A.K. Saha, G. Biswas, and K. Muralidhar, Two-Dimensional Study of the Turbulent Wake Behind a Square Cylinder Subject to Uniform Shear, Journal of Fluids Engineering (ASME), Vol. 123, pp. 595-603, (2001).

  49. T. Cziesla, G. Biswas, H. Chattopadhyay and N.K. Mitra, Large-Eddy Simulation of Flow and Heat Transfer in an Impinging Slot Jet, Int. J. Heat and Fluid Flow, Vol. 22, pp. 500-508, (2001).

  50. P. Sandilya, D.P. Rao, A. Sharma and G. Biswas, Gas-Phase Mass Transfer in a Centrifugal Contractor, Ind. Eng. Chem. Res., Vol. 40, pp. 384-392, (2001).

  51. P. Sandilya, G. Biswas, D.P. Rao and A. Sharma, Numerical Simulation of the Gas Flow and Mass Transfer Between Two Coaxially Rotating Disks, Numerical Heat Transfer, Part A, Vol.39, pp. 285-305, (2001).

  52. R. Vasudevan, V. Eswaran and G. Biswas, Winglet Type Vortex Generators for Plate-Fin Heat Exchangers Using Triangular Fins, Numerical Heat Transfer, Part A, Vol.38, pp. 533-555, (2000).

  53. A.K. Saha, K. Muralidhar,and G. Biswas, Experimental Study of Flow Past a Square Cylinder at high Reynolds Numbers, Experiments in Fluids, Vol. 29, pp. 553-563, (2000).

  54. P.K. Maji and G. Biswas, Analysis of Flow in the Plate Spiral of a Reaction Turbine Using a Streamline Upwind Petrov-Galerkin Method, International Journal for Numerical Methods in Fluids, Vol. 34, pp. 113 -144, (2000).

  55. A.K. Saha, K. Muralidhar,and G. Biswas, Transition and Chaos in Two-Dimensional Flow Past a Square Cylinder, Journal of Engineering Mechanics (ASCE), Vol. 126, pp. 523-532, (2000).

  56. A.K. Saha, G. Biswas and K. Muralidhar, Numerical Study of the Turbulent Unsteady Wake Behind a Partially Enclosed Square Cylinder using RANS, Computer Methods in Applied Mechanics and Engineering, Vol. 178, pp. 323-341, (1999).

  57. T. Cziesla, G. Biswas and N.K. Mitra, Large Eddy Simulation in a Turbulent Channel Flow Using Exit Boundary Conditions, International Journal for Numerical Methods in Fluids, Vol. 30, pp. 763-773, (1999).

  58. P.K. Maji and G. Biswas, Analysis of Flow in the Spiral Casing Using a Streamline Upwind Petrov-Galerkin Method, International Journal for Numerical Methods in Engineering, Vol. 45, pp. 147-174, (1999).

  59. A.K. Saha, G. Biswas, and K. Muralidhar, Influence of Inlet Shear on the Structure of Wake behind a Square Cylinder, Journal of Engineering Mechanics (ASCE) Vol. 125, pp. 359-363, (1999).

  60. A.K. Saha, K. Muralidhar,and G. Biswas, Vortex Structures and Kinetic Energy Budget in Two-Dimensional flow Past a Square Cylinder, Computers and Fluids, Vol. 29, pp. 669-694, (2000).

  61. A.A. Bastani Jahromi, N.K. Mitra and G. Biswas, Numerical Investigations on Enhancement of Heat Transfer in a Compact Fin-and -Tube Heat Exchanger Using Delta Winglet Type Vortex Generators, Enhanced Heat Transfer, , Vol. 6, pp. 1-11, (1999).

  62. S. Singh, G. Biswas, and A. Mukhopadhyay, Effect of Thermal Buoyancy on the Flows through a Vertical Channel with a Built-in Circular Cylinder, Numerical Heat Transfer, Part A, Vol. 34, pp. 769-789, (1998).

  63. P.K. Maji and G. Biswas, Three-dimensional Analysis of Flow in the Spiral Casing of a Reaction Turbine using a Differently Weighted Petrov Galerkin Method, Computer Methods in Applied Mechanics and Engineering, Vol. 167, pp. 167-190, (1998).

  64. G. Biswas, V. Eswaran, G. Ghai and A. Gupta, A Numerical Study on Flow Through the Spiral Casing of a Hydraulic Turbine, International Journal for Numerical Methods in Fluids, Vol. 28, pp. 143-156, (1998).

  65. B.L. Owsenek, T. Cziesla, N.K. Mitra and G. Biswas, Numerical Investigation of Heat Transfer in Impinging Axial and Radial Jets with Superimposed Swirl, International Journal of Heat and Mass Transfer, Vol. 40, pp. 141-147, (1997).

  66. H. Laschefski, T. Cziesla, G. Biswas and N.K. Mitra, Numerical Investigation of Heat Transfer by Rows of Rectangular Impinging Jets, Numerical Heat Transfer, Part A, Vol. 30, pp. 87- 101, (1996).

  67. T. Cziesla, H. Braun. G. Biswas and N.K. Mitra, Large Eddy Simulation in a Channel with Exit Boundary Conditions, ICASE No. 96-18, NASA Contract No. NASI-19480, Langley Research , Hampton, Virginia, USA, (1996).

  68. G.Biswas, K.Torii, D.Fujii and K.Nishino, Numerical Experimental Determination of Flow Structure and Heat Transfer Effects of Longitudinal Vortices in a Channel Flow, International Journal of Heat and Mass Transfer, Vol. 39, pp. 3441-3451, (1996).

  69. P.Deb, G.Biswas and N.K.Mitra, Heat Transfer and Flow Structure in Laminar and Turbulent Flows in a Rectangular Channel with Longitudinal Vortices, International Journal of Heat and Mass Transfer, Vol. 38, pp. 2427-2444, (1995)

  70. S. Chakraborty, S.P.Sengupta and G. Biswas, Fluid Flow and Transfer in a Laminar Radial Impinging Jet, Int. Journal of Numerical Methods for Heat and Fluid Flow, Vol. 4, pp. 173-185, (1994)

  71. F.Potthast, H.Laschefski, N.K.Mitra and G.Biswas, Numerical Investigation of Flow Structure and Mixed Convection Heat Transfer of Impinging Radial and Axial Jets, Numerical Heat Transfer,Part-A, Vol. 26, pp. 123-140, (1994)

  72. G.Biswas, N.K.Mitra and M. Fiebig, Heat Transfer Enhancement in Fin-Tube Heat Exchangers by Winglet Type Vortex Generators, International Journal of Heat and Mass Transfer, Vol.37, pp. 283-291, (1994)

  73. G. Biswas, P. Deb and S. Biswas, Generation of Longitudinal Streamwise Vortices - A Device for Improving Heat Exchanger Design, Journal of Heat Transfer (ASME), Vol. 116, pp. 588-597, (1994)

  74. A. Mukhopadhyay, T.Sundararajan and G.Biswas, An Explicit Transient Algorithm for Predicting Incompressible Viscous Flows in Arbitrary Geometry, International Journal for Numerical Methods Fluids, Vol. 17, pp. 975-993, (1993)

  75. A. Mukhopadhyay, G.Biswas and T.Sundararajan, Numerical Investigation of Confined Wakes Behind a Square Cylinder in a Channel, International Journal for Numerical Methods in Fluids, Vol. 14, pp. 1473-1484, (1992)

  76. G.Biswas and H.Chattopadhyay, Heat Transfer in a Channel Flow with Built-in Wing-Type Vortex Generators, International of Journal Heat and Mass Transfer, Vol. 35, pp. 803-814, (1992)

  77. G.Biswas, H.Laschefski, N.K.Mitra and M.Fiebig, Numerical Investigationof Mixed Convection Heat Transfer in a Horizontal Channel with a Built-in Square Cylinder, , Numerical Heat Transfer - Part A, Vol. 18, pp. 173-188,(1990)

  78. G.Biswas, N.K.Mitra and M. Fiebig, Computation of Laminar Mixed Convection Flow in a Channel with Wing-Type Built-in Obstacles, AIAA Journal of Thermophysics and Heat Transfer, Vol. 3, pp. 447-453, (1989)

  79. G.Biswas, N.K.Mitra and M.Fiebig, Mixed Convection Flows in a Channel with a Vortex Generator, ZAMM, Vol. 69, issue 6, pp. T 643- 645, (1989)

  80. G.Biswas and A.S.Gupta, Spreading of non-Newtonian Liquid Drop a Horizontal Plane, Mechanics Research Communications, Vol. 14, pp. 361-370, (1987)

  81. P.Mukherjee, G.Biswas and P.K.Nag, Second Law Analysis of Heat in Swirling Flow through a Cylindrical Duct, Journal of Heat Transfer (Trans ASME), Vol. 109, pp. 308-313,(1987)

  82. G.Biswas, P.K.Nag and A.S.Gupta, Heat Transfer in a Corner Flow, Warme und Stoffubertragung (Heat and Mass Transfer), Vol. 21, pp. 13-14,(1987)

  83. S.K.Som and G.Biswas, Dispersion of Spray from Swirl Nozzles, Chemical Engineering and Processing, Vol. 20, pp. 191-200, (1986)

  84. G.Biswas and S.K.Som, Coefficient of Discharge and Spray Cone Angle of a Pressure Nozzle with Combined Axial and Tangential Entry of Power-Law Fluids, Applied Sci Res, Vol. 43, pp. 3-22, (1986)

  85. G.Biswas, S.K.Som and A.S.Gupta, Instability of a Moving Liquid Sheet, Journal of Fluids Engineering (ASME), Vol. 107, pp. 451-454, (1985)

  86. S.K.Som and G.Biswas, Convective Heat Transfer in a Streaming and Swirling Flow Through a Cylindrical Duct, Warme und Stoffubertragung (Heat and Mass Transfer), Vol. 19, pp. 31-39, (1985)

  87. S.K.Som and G.Biswas, Initiation of Air Core in a Swirl Nozzle Using Time-Independent Power-Law Fluids, Acta Mechanica, Vol. 51, pp. 179-197, (1984)

National Journals (in reverse chronological order)

  1. K Arul Prakash, B V Rathish Kumar and G Biswas, A Numerical Study of the Target System of an ADSS with Different Flow Guides, PRAMANA, Vol. 68, pp. 365-376, (2007).
  2. G. Biswas, Heat Transfer and Fluid Mechanics Related to Turbulent Flow, Annals of the Indian National Academy of Engineering, Vol. II, pp. 19-25, (2005).
  3. G.Biswas and P. Deb, Heat Transfer and Flow Structure in a Turbulent Channel Flow with Embedded Longitudinal Vortices, Journal of Energy Heat and Mass Transfer, Vol. 22, pp. 141-148, (2000).
  4. A.K.Saha, and G.Biswas, Application of a Multigrid Method for Flows Behind Bluff Bodies in a Channel, Journal of Institution of Engineers (Aerospace), Vol. 77, pp 13-21, (1996). The Paper was given THE AEROSPACE ENGINEERING DIVISION MEDAL, 1997-98.
  5. H. Chattopadhyay and G.Biswas, Augmentation of Heat Transfer Using Wing-Type Vortex Generators, Journal of Energy Heat and Mass Transfer, Vol. 15, pp 325-330,(1993).
  6. G.Biswas, N.K.Mitra, and M.Fiebig, Computation of Laminar Mixed Convection Flows in a Duct with a Built-in Wing Generator, Journal of Energy Heat and Mass Transfer, Vol. 13, pp 47-55, (1991).
  7. A.K.Chattopadhyay, D.N.Roy and G.Biswas, Radial Flow of a Viscous Fluid Between Two Co-axially Rotating Discs, Indian Journal of Technology, Vol. 29, pp 221-227, (1991).

  8. G.Biswas and S.G.Mukherjee, An Investigation on the Abrasive Properties of Low Grade Solid Fuels for Power Generation, J.Inst.of Engg., Vol. 64, ME 4, pp 154-158, (1984).

PUBLICATIONS (PROCEEDINGS)

International Conferences (in reverse chronological order)

  1. G. Biswas, Some Aspects of Bubble Growth in Film Boiling Using a variant of Volume-of-Fluid Method, IIT Kanpur Golden Jubilee Indo-US Conference on Fabrionics: Science of Advanced Fabrication, IIT Kanpur December 9-12, 2010.

  2. G. Biswas, Large-eddy Simulation of Turbulent Channel Flow by Shear-improved Smagronisky Model, IIT Kanpur Golden Jubilee International Conference on Turbulence, December 21-23, 2010.

  3. I. Chakraborty, G. Biswas and P.S. Ghoshdastidar, The Dynamics of Gas Bubbles in a Co-flowing Liquid Ambience, Paper ID: 214, Proceedings of the 20th National and 9 th International ISHMT ASME Heat and Mass Transfer Conference, Mumbai, January 4-6, pp. 801- 807, doi:10.3850/9789810838133 214, 2010.

  4. B. Ray, G. Biswas and A. Sharma, Bubble Entrapment Phenomena in Liquids, Paper ID: 252 , Proceedings of the 20th National and 9 th International ISHMT ASME Heat and Mass Transfer Conference, Mumbai, January 4-6, pp. 937-942, doi:10.3850/9789810838133 252, 2010.

  5. P. Saha and G. Biswas, Numerical Analysis of Turbulent Flow and Heat Transfer in a Channel with Longitudinal Vortex Generators using LES, Paper ID: 349, Proceedings of the 20th National and 9 th International ISHMT ASME Heat and Mass Transfer Conference, Mumbai, January 4-6, pp. 1337 - 1341, doi:10.3850/9789810838133 349, 2010.

  6. G. Biswas, Prediction of Bubble Growth in Film Boiling using a Variant of Volume-of-Fluid Method, University of Western Ontario, Research Seminar of the Faculty of Engineering, June 24, 2008

  7. A. Dalal, V. Eswaran and G. Biswas, Natural Convection around a Heated Square Cylinder placed in Different Angles inside an Enclosure, 8th ISHMT ASME Heat and Mass Transfer Conference, January 3-5, JNTU. Hyderabad, India, 2008

  8. G. Tomar, G. Biswas, S.W.J. Welch and A. Sharma, Multi-mode Analysis of Bubble Growth in Saturated Film Boiling, 8th ISHMT ASME Heat and Mass Transfer Conference, January 3-5, JNTU. Hyderabad, India, 2008

  9. K. Arul Prakash, B. V. Rathish Kumar and G. Biswas, Numerical Simulation of Thermal Hydraulics in an ADSS Model, Proc Appl. Math. Mech. (PAMM), 2150025-2150026, (2007)/ DOI 10.1002/pamm.200700649

  10. G. Tomar, G. Biswas and A. Sharma, Analysis of Formation of Vapor Columns in Flim Boiling (IMECE2007-41124), Proceedings of IMECE 2007, 2007 ASME International Mechanical Engineering Congress and Exposition, November 11-15, Seattle, USA, 2007.

  11. Educational Environment in India: A Review Invited talk (coauthored with S.G. Dhande) at the 10th KAST International Symposium on Interdisciplinary Education for Science and Technology Innovation, September 13-14, Seoul, Korea, 2007.

  12. K. Arul Prakash, B. V. Rathish Kumar and G. Biswas, Numerical Study of Natural Convection in the Spallation Target Module of an Accelerator Driven Sub-Critical System, 33rd National and 3rd International Conference on Fluid Mechanics and Fluid Power, paper number 1414, IIT Bombay, December 7-9, 2006.

  13. G. Tomar , G. Biswas and A. Sharma, A Comparison of VOF and CLSVOF Method for Predicting Surface Tension Dominated Two-Phase Flows, 33rd National and 3rd International Conference on Fluid Mechanics and Fluid Power, paper number 1417, IIT Bombay, December 7-9, 2006.

  14. M. K. Radle, E.G. Tulapurkara and G. Biswas, Large Eddy Simulation of Flow Past Square Cylinder with Fine Grid, 33rd National and 3rd International Conference on Fluid Mechanics and Fluid Power, paper number 1308, IIT Bombay, December 7-9, 2006.

  15. G. Biswas, Large-Eddy Simulation of Flows Concerning Impinging Jets and Bluff Body Wakes, (Invited Talk), Proceedings of the Eleventh Asian Congress of Fluid Mechanics (11ACFM), pp. 56-65, May 22-25, 2006, Kuala Lumpur, Malaysia.

  16. A. Agrawal, G. Biswas, S.W.J. Welch and F. Durst, Prediction and Analysis of the Bubble Formation in Film Boiling, IMECE-2004, Vol.1 (ISBN: 0-7918-4178-2), November 13-19, 2004, Anaheim, California, USA.

  17. G. Biswas, Analysis of Bubble Formation in Film Boiling, INVITED TALK, FLUENT CFD Conference for India and South East Asia, Pune, India, November 18-20, 2003.

  18. K. Senthil Kumar, E.G. Tulapurkara and G. Biswas, 2-D LES Flow Past a Square Cylinder, Second International and Twenty Ninth National Conference on Fluid Mechanics and Fluid Power, Roorkee, pp. 417-421, 2002.

  19. D. Maurya, S. Tiwari, G. Biswas, V. Eswaran and A.K. Saha, Numerical Prediction of Enhanced Heat Transfer using Oval Tubes and Delta Winglets, IMECE-2002-34406, New Orleans, USA, 2002.

  20. V. Kumar, G. Biswas, G. Brenner and F. Drust, Numercial Investigation on the Effect on Marangoni Convection in an Industrial Czochralski Crucible, IMECE-2002-33719, New Orleans, USA, 2002.

  21. G. Biswas, Enhancement of Heat Transfer Using Longitudinal Vortices, Kynote Lecture at the 12 th International Heat Transfer Conference at Grenoble, France, August 18-23, 2002, 07-KNL-01, Published in Heat Transfer 2002 (Vol. 1, pp. 257).

  22. G. Biswas and T. Cziesla, Large-eddy Simulation of Impinging Jets at Moderate Reynolds Numbers (Invited Talk) International Symposium on Recent Trends in Heat and Mass Transfer, IIT Guwahati, January 6-8, 2002.

  23. V. Prabhakar, G. Biswas, V. Eswaran and S. Tiwari, Numerical Prediction of Heat Transfer in a Channel with a Built-in Oval Tube and Vortex Generators, Proceedings of the Fifth ISHMT-ASME Joint Heat and Mass Transfer Conference, 2002.

  24. S. Basu, V. Eswaran and G. Biswas, Numerical Prediction of Flow and Heat Transfer in a Rectangular Channel with a Built-in Circular Tube, Proceedings of the IMECE, HTD-24115, pp. 1-13, New York, 2001.

  25. M. Singh, P.K. Panigrahi and G. Biswas, Flow Characteristics in a Three-Dimensional Rectangular Channel with a Pair of Ribs Placed Symmetrically at the Channel walls, Proceedings of the HTD, IMECE, Orlando, USA, Vol. 366-3, pp.79-87, 2000.

  26. G. Biswas, and N.K. Mitra, Use of Organized Vortices for Improved performance of Heat Exchanger Surfaces: Numerical Approach, Fourth ISHMT- ASME Joint Heat and Mass Transfer Conference, Pune, Januray 12-14, 2000. (Invited Lecture)

  27. G. Biswas, Large Eddy Simulation of Turbulence: Some Applications, International Conference on Challenges and New Directions in Computation of Internal Flows, IIT Madras, January 5-7, 2000. (Invited Lecture)

  28. T. Cziesla, N.K. Mitra and G. Biswas, Numerical Investigation of Turbulent Heat Transfer by Impinging Jets, 11 th International Heat Transfer Conference, Kyongju, Korea, Vol. 4, pp. 241-245, 1988.

  29. G. Biswas and N.K. Mitra, Longitudinal Vortex Generators for Enhancement of Heat Transfer in Heat Exchanger Applications, 11 th International Heat Transfer Conference, Kyongju, Korea, Vol. 5, pp. 339-344, 1988.

  30. A.K. Saha, K. Muralidhar and G. Biswas, Measurements in the Near Wake Behind a Square Cylinder at High Reynolds Numbers, 25th National and 1st International FMFP Conference, IIT Delhi, New Delhi, pp 668-677, 1998.

  31. A.K. Saha, G. Biswas and K. Muralidhar, Computation of Three-Dimensional Flow Past a Square Cylinder, The Seventh Asian Congress of Fluid Mechanics, IIT Madras, Chennai, pp 395-398, 1998

  32. A.K. Saha, G. Biswas and K. Muralidhar, Computation of Ensemble Averaged Characteristics of Turbulent Wake behind a Partially Enclosed Square Cylinder using RANS, Third Asian CFD Conference, Bangalore, pp 360-365, 1998.

  33. S.K. Bhadra, G. Biswas and K. Muralidhar, Reconstruction of the Temperature Field in Rayleigh-Benard Convection in a Cavity using Interferometry, Proceedings of the Third ISHMT-ASME Joint Heat and Mass Transfer Conference, IIT Kanpur, pp -752, (1997).

  34. K. Veerabathra Swamy, G. Biswas and K. Venkatraman, Numerical Investigation of Heat Transfer and Control of Vortex Shedding in Wake of a Circular Cylinder, Proceedings of the Third ISHMT-ASME Joint Heat and Mass Transfer Conference, IIT Kanpur, pp -696, (1997).

  35. K. Torii, P.M.V. Subbarao and G. Biswas, Experimental Study on Enhancement of Heat Transfer Due to Longitudinal Vortices in a Channel, Proceedings of the Third ISHMT-ASME Joint Heat and Mass Transfer Conference, IIT Kanpur, pp 395-400, (1997).

  36. P. Sandilya, G. Biswas and A. Sharma, Gas-phase Controlled Absorption for Countercurrently Flowing Gas and Liquid Between Two Disks, Proceedings of the Third ISHMT-ASME Joint Heat and Transfer Conference, IIT Kanpur, pp 341-346, (1997).

  37. A.K. Saha, G. Biswas and K. Muralidhar, Effect of Inlet Shear on Vortex Shedding and Wake Structure Behind a Square Cylinder, Int Conf on Advances in Mechanical and Industrial Engineering, Univ Roorkee, pp 427-434, February, 1997.

  38. P. Sandilya, G. Biswas and A. Sharma, Effect of Co current and Countercurrent Flow of A Gas and A Liquid Between Two Rotating Disks on Gas-Phase Controlled Absorption, Proc Int Conf on in Chemical Engineering, pp 119-124, IIT Madras , Dec, 1996.

  39. A.K.Saha, K. Muralidhar and G. Biswas, Comparison of Numerical and Experimental Studies of Flow Past a Square Cylinder, Proc. of The Ninth International Symposium on Transport Phenomna, Singapore, pp 327-332, 1996.

  40. G.Biswas and P.Deb, Heat Transfer and Flow Structure in a Turbulent Channel Flow with Embedded Longitudinal vortices, Proc. of the Second ISHMT-ASME Joint Heat and Mass Transfer Conefrence, pp 211-216, 1995.

  41. P.Deb, G.Biswas and N.K.Mitra, Vortex Structure and Heat Transfer in a Rectangular Channel in the Presence of Delta-Winglets, Proceedings of the Tenth International Heat Transfer Conference, Brighton, Vol. 7, pp 227-232, 1994.

  42. G.Biswas , N.K.Mitra and M.Fiebig, Numerical Prediction of Heat Transfer in a Flow Around Built-in Circular Obstacle and Generators in a Channel, Proceedings of the First ISHMT-ASME Joint Heat and Mass Transfer Conference - BARC Bombay , pp 535-540, 1994.

  43. G.Biswas and N.K.Mitra, Numerical Investigation of Heat Transfer and Flow Loss in a Fin-Tube Heat Exchanger Element with Longitudinal Vortex Generators, Proc. of the Eurotherm 31 - Bochum, pp 215-223, May 1993.

  44. G.Biswas, N.K.Mitra, M.Fiebig, and J.S.Cornelius, Numerical Investigation of Laminar Mixed Convection Flows in Rectangular Horizontal Ducts, Proc. of the Ninth International Heat Transfer Conference , Jerusalem, Vol. 2, pp 435-439, 1990.

  45. S.Chakraborty, S.P.Sengupta, and G.Biswas, Heat Transfer in a Laminar Radial Impinging Jet, Proc. of the Ninth International Heat Transfer Conference, Jerusalem, Vol. 4, pp 181-186, 1990.

  46. G.Biswas, N.K.Mitra, and M.Fiebig, Influence of Buoyancy on Structure of Laminar Wakes of Partially Enclosed Bodies, The Fourth Asian Congress of Fluid Mechanics, Hong Kong, pp A276-A279, 1990.

  47. G.Biswas,T.Pelster,J.S.Cornelius,N.K.Mitra and M.Fiebig, Three Dimensional Computation of Laminar Mixed Convection Flows in a Horizontal Rectangular Duct with a uniformly Heated Bottom Wall, Proc. of the 6th International Conference on Numerical Methods for Thermal Problems, Swansea, UK, Vol. VI , Part 2, pp 1721-1731,1989.

  48. G.Biswas, N.K.Mitra and M.Fiebig, Navier-Stokes Computations of Three Dimensional Laminar Flows with Buoyancy in a Channel with Type Vortex Generators, Advances in Fluid Dynamics, edited by .F.Ballhaus Jr. and M.Y.Hussani, Springer Verlag, pp 11-24, 1989.

  49. G. Biswas, N.K.Mitra and M.Fiebig, Computation of Laminar Mixed Convection Flow in a Rectangular Duct with Wing-Type Built-in Obstacles, AIAA Paper No. 88-2647, AIAA Thermophysics and Lasers Conference, San Antonio-Texas,USA, June-29, 1988.

  50. G. Biswas, H.Laschefski, N.K.Mitra and M.Fiebig, Numerical Solution of Forced and Mixed Convection Heat Transfer in a Channel with Built-in Obstacle, International Heat and Mass Transfer Forum, A.V.Luikov Heat and Mass Transfer Inst, Minsk, Vol. 2, pp 22-36, May,1988.

  51. G. Biswas, N.K.Mitra and M. Fiebig, Mixed Convection Flows in a Channel with a Vortex Generator, GAMM Conference , TU Vienna, 5-9 April, 1988.

National Conferences (in reverse chronological order)

  1. G. Biswas, Understanding Vapor and Air bubbles, CNR Rao Lecture at IIT Kanpur, February 25, 2010.

  2. G. Biswas, Understanding Drops, Twenty-first Mid-year Meeting, Indian Academy of Sciences, Bangalore, July 2 – 3, 2010

  3. Analysis of Bubble Growth in Film Boiling Using a Variant of Volume of Fluid Method, BRNS-INS Symposium on Multiphysics Modeling for Current and Future Nuclear Reactors, BARC, Mumbai, November 3-4, 2008

  4. G. Tomar, G. Biswas and A. Sharma, Prediction of bubble growth in film boiling using a variant of coupled level-set and volume-of-fluid method, 2nd Joint Workshop NTUS-IITK Workshop in Mechanical, Aerospace, Industrial and Management Engineering, IIT Kanpur, April 5-6, 2008

  5. G. Biswas, Modeling of Free Surface Flows with a Focus on the Analysis of Bubble Formation in Film Boiling, Bhatnagar Memorial Lecture (lecture only) at the Congress of Indian Society of Theoretical and Applied Mechanics (ISTAM), BNM Institute of Technology, Bangalore, December 14-16, 2007.

  6. G. Biswas, Invited talk (CMERI Golden Jubilee Lecture Series, lecture only) Mathematical Analysis of Turbulent Flows for Practical Applications, CMERI, Durgapur, December 3, 2007

  7. G. Biswas and G. Tomar, Modeling of Free Surface Flows and Bubble Formation in Film Boiling (lecture only), Invited Talk, National Workshop: CFD Approach on Fluid Flow, Heat and Mass Transfer, IIT Roorkee, April 12-13, 2007.

  8. G. Biswas, Mathematical Modelling of Turbulence, (lecture only) National Conference on CFD Applications in Power and Industry Sectors organized by the Corporate Research and Development of BHEL, Hyderabad, November 17-18, 2006.

  9. G. Biswas, Some Aspects of Kaleidoscopic Flow Past a Square Cylinder, Aswathanarayana Honorary Lecture, 32nd National Conference on Fluid Mechanics and Fluid Power, Osmanabad, India, HL1-1-21, 15-17 December, 2005.

  10. G. Biswas, Some Aspects of the Mathematical Models of Turbulent Flows, Invited Talk at the 6th Annual CFD Symposium (In honour of Prof. S.M. Deshpande), Bangalore, India, August 11-13, 2003.

  11. G. Biswas, Longitudinal Vortices and Enhanced Heat Transfer: Analysis of Flow and Transport Rate (Invited Talk), Proceedings of the Sixteenth National Convention of Mechanical Engineers, University of Roorkee, Vol. 2, pp. 885-896, 2000.

  12. A K Saha,K. Muralidhar and G. Biswas, Transition to Chaos in Two- Dimensional Flow Past a Square Cylinder, National Conference on Fluid Mechanics and Fluid Power, IIT Kharagpur, December 15-17, 1999. The Paper was given the BEST PAPER AWARD, M.G. DESHPANDE MEMORIAL PRIZE.

  13. G. Biswas, A K Saha and K. Muralidhar, Invited Lecture on Large Eddy Simulation of Turbulence, Workshop on RANS, LES and , Dept of Aerospace Engineering, Indian Institute of Science, Bangalore, November 11-12, 1997.

  14. G. Biswas and P.K. Maji, Invited Lecture on Incompressible Navier Stokes Solvers, DRDL-CFD-96, Hyderabad, (1996).

  15. G. Biswas and K. Muralidhar, Fundamentals and Modeling of Turbulent Flow, Invited Lecture , pp 25-34, Proceedings of the Transport Phenomena in Metallurgical Processes-96, National Metallurgical Laboratory-Jamshed pur, (1996).

  16. M.Sarkar, G.Biswas and T.Sundararajan, Simulation of Velocity and Temperature Fields in a Communicating Channel. 38th Congress of Indian Society of Theoretical and Applied Mechanics-Kharagpur, Lecture- MF-35 (paper was presented only ), (1993).

  17. H. Chattopadhyay and G.Biswas, Augmentation of Heat Transfer Using Wing-Type Vortex Generators, Proc. of the 11th National Heat and Mass Transfer Conference, Indian Institute of Technology Madras, December 21-23, (1991).

  18. S.Chakraborty and G.Biswas, Heat Transfer in Radial Jet Reattachment Flow, National Workshop on Trends in Mechanical Education and Research, Indian Institute of Technology, Kharagpur, 26.1-26.14, (1989).

  19. G.Biswas, N.K.Mitra and M.Fiebig, Numerical Flow Visualization and Structure of Wakes Behind a Bluff-Body in a Two-Dimensional Duct, Proc. of the XI National Conference on IC Engines and , Indian Institute of Technology, Madras, pp 1049-1056, 11-15, (1989).

  20. G.Biswas, N.K.Mitra and M. Fiebig, Computation of Laminar Mixed Convection Flows in a Duct with Built-in Wing Generator, 10th National Heat and Mass Transfer Conference, Srinagar, August -25, (1989).

  21. G.Biswas and P.K.Nag, Flame Tube Wall Temperature and Combustion Efficiency of a Combustor Using Air Blast Atomization, IX National Conference on IC Engines and Combustion, Vol. II, No J-2, (1985).

PAPER AWARDS

  1. The Aerospace Engineering Division Medal 1997-98 The Institute of Engineers for the paper entitled Application a Multigrid Method for Flows Behind Bluff Bodies in a Channel.

  2. Best Paper Award, M.G. Deshpande Memorial Prize at the National Conference on Fluid Mechanics and Fluid Power held at IIT Kharagpur, January 5-7, 2000 for the paper entitled Transition to Chaos in Two-Dimensional Flow Past a Square Cylinder (with A.K. Saha and K. Muralidhar).

BOOKS

  1. Two Major Chapters in Compututional Fluid Flow and Heat Transfer, Edited by K. Muralidhar and T. Sundararajan under the auspices of IIT Kanpur Series, Narosa, India (1995), Revised Edition (2003).
  2. K. Muralidhar and G. Biswas, Advanced Engineering Fluid Mechanics, Narosa, New Delhi and London (1996).
  3. G. Biswas, S. Srinivasa Murthy, K. Muralidhar and V.K. Dhir, Heat and Mass Transfer-97 , Proceedings of the Third ISHMT-ASME Heat and Mass Transfer Conference and 14th National Heat and Mass Transfer Conference -IIT Kanpur, Narosa, New Delhi (1997).
  4. S.K. Som and G. Biswas, Introduction to Fluid Mechanics and Machines, Tata McGraw-Hill Publishing Company, New Delhi.(1998)
  5. G. Biswas and V. Eswaran, Turbulent Flows: Fundamentals, Experiments and Modeling, Narosa Publishing House, New Delhi, 2002.
  6. S.K. Som and G. Biswas, Introduction to Fluid Mechanics and Fluid Machines, Second Edition, Tata McGraw-Hill Publishing Company, New Delhi, (2004)
  7. K. Muralidhar and G. Biswas, Advanced Engineering Fluid Mechanics, Narosa, New Delhi, Second Edition (2005).
  8. S.K. Som and G. Biswas, Introduction to Fluid Mechanics and Fluid Machines, Revised Second Edition, Tata McGraw-Hill Publishing Company, New Delhi, 2008

  9. Gautam Biswas, K. L. Chopra, C. S. Jha, D. V. Singh, Profile of Engineering Education in India: Status, Concerns and Recommendations, Narosa Publishing House, India (2010) 

WEB-BASED COURSES

  1. Created Web-based Course on FLUID MECHANICS for the sophomore students (under the auspices of MHRD sponsored NPTEL Project)

  2. Created Web-based Course on FLUID MACHINERY for the senior undergraduate students (under the auspices of MHRD sponsored NPTEL Project)

 


 
 
Central Mechanical Engineering Research Institute
Durgapur-713209, India